Below are a few 3D Toronto images from a demonstration that I gave comparing Esri Arc Scene with FLY in PCI Geomatica. I generated the digital surface model (DSM) from some demo LIDAR all hits data that we had. The coverage area is for a small portion of downtown Toronto centered around Toronto City Hall.
I have been operating and managing LIDAR projects using the TITAN mobile laser scanning system for over two years now, in a variety of projects from coast to coast. This post contains some information on the hardware and various photos of the TITAN mobile laser scanning system.
Summary poster created to show GPS validation data collected for 2003 LIDAR survey of the Annapolis Valley. Poster was one of several presented at the Geomatics Atlantic 2003 Conference held at Acadia University in Wolfville, Nova Scotia and posted at the Applied Geomatics Research Group seminar room in Middleton, Nova Scotia.
The above two images were created for my LIDAR flood modeling graduate research project. The first image is before the flood scenario; featuring a color shaded relief perspective view pointing south east from the Northumberland Strait landwards across the Pointe Du Chene wharf. The second image is of the same color shaded relief perspective view but features a 2.55 m flood level super imposed on top of it.
The 2.55 m flood level was an actual recorded storm surge water level that effected this area during a winter storm on January 2001. The two images below show the same flood level and area but from an overhead aerial view. The first image is with an orthophoto and the second image is with the color shaded relief.
The two images above are of a portion of the small town of Shediac, New Brunswick. Each one is of the same spatial extent, however the one on the left is of an aerial photo of the town (1999) while the one on the right is a color shaded relief model created from high resolution LIDAR data (2003) using PCI Geomatica software. The LIDAR digital surface model (DSM) was part of a LIDAR flood modeling graduate research project.
Shediac is a small town located in eastern New Brunswick approximately 20 kilometers north of Moncton. The town calls itself the “Lobster Capital of the World”, hosts an annual lobster festival every July, and the world’s largest lobster sculpture is situated at the main entrance to town.
The two images above represent artificial 3D perspective views from different points of origin featuring color shaded relief models that were created from high resolution LIDAR digital surface models as part of a LIDAR flood modeling graduate research project. The image on the left highlights a highway overpass while the image on the right features a residential area with a large school and a church easily detectable in the LIDAR all hits data set. Bouctouche is a small town located in eastern New Brunswick approximately 40 kilometers north of Moncton where the Bouctouche River meets the Northumberland Strait. It was an important aspect of the research study due to the extreme storm surge flooding that the region experiences every winter.
The following co-authored paper featuring my graduate LiDAR research work at the AGRG was published in the Canadian Journal of Remote Sensing in 2006. Airborne light detection and ranging (LiDAR) has the spatial density and vertical precision required to map coastal areas at risk of flooding from water levels typically 1–2 m higher than predicted tides during storm surges. In this study …
3D color shaded relief (CSR) digital terrain model (DTM) of Bouctouche, New Brunswick created with LIDAR point data.